Leupold GX-1i3 Operating Instructions Manual page 22

TGR SETUP (SU) (GX-2i
NOTE: GX-1i model will only display LOS in large
3
numbers above the reticle .
YARDS/METERS OUTPUT
1) Press POWER to activate the rangefinder .
2) Press and hold MODE for at least 2 seconds to
enter the Quick Set Menu .
3) Press and release MODE until the word Unit is shown in the upper display
4) While the word Unit is shown in the upper display,
press and release POWER as necessary to toggle
between yards and meters, shown in the upper
right portion of the display .
5) To save the changes and return to ranging mode,
press and release MODE .
NOTE: If yards is selected, the temperature will
automatically be measured by Fahrenheit . If meters is
selected, the temperature will be in Celsius .
19
ONLY)
3
M
Y
in
cm
ft
M
Y
in
cm
ft