Scope - Seagate CONSTELLATION SAS ST9500430SS Product Manual

2.0

Scope

This manual describes Seagate Technology
Constellation drives support the SAS Protocol specifications to the extent described in this manual. The SAS
Interface Manual (part number 100293071) describes the general SAS characteristics of this and other Sea-
gate SAS drives. The Self-Encrypting Drive Reference Manual, part number 100515636, describes the inter-
face, general operation, and security features available on Self-Encrypting Drive models.
Note. Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption
(FDE) models before a differentiation between drive-based encryption and other forms of encryp-
tion was necessary.
Product data communicated in this manual is specific only to the model numbers listed in this manual. The data
listed in this manual may not be predictive of future generation specifications or requirements. If you are
designing a system which will use one of the models listed or future generation products and need further
assistance, please contact your Field Applications Engineer (FAE) or our global support services group as
shown in Section 1.0.
Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models.
Model Number Self-Encrypting Drive (SED)
ST9500430SS No
ST9500431SS Yes
ST9500432SS Yes
For more information on FIPS 140-2 Level 2 certification see Section 8.0 on page 35.
2
® ®
LLC, Constellation SAS (Serial Attached SCSI) disc drives.
FIPS 140-2 Level 2 certified
No
No
Yes
Constellation SAS Product Manual, Rev. E