Scope - Seagate ST8000NM0065 Product Manual

1.0

Scope

This manual describes Seagate® Enterprise Capacity 3.5 HDD v5 SAS (Serial Attached SCSI) disk drives.
Enterprise Capacity 3.5 HDD v5 drives support the SAS Protocol specifications to the extent described in this manual. The SAS Interface Manual (part
number 100293071) describes the general SAS characteristics of this and other Seagate SAS drives.
Product data communicated in this manual is specific only to the model numbers listed in this manual. The data listed in this manual may not be
predictive of future generation specifications or requirements. If designing a system which will use one of the models listed or future generation
products and need further assistance, please contact the Field Applications Engineer (FAE) or our global support services group as shown in See
"Seagate® Technology Support Services" on page 5.
Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models.
Standard 4KN Standard Power Balance
models
ST8000NM0065
ST6000NM0075
Standard 512E
models
ST8000NM0075
ST6000NM0085
Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption (FDE) models
Note
before a differentiation between drive-based encryption and other forms of encryption was necessary.
.
The Self-Encrypting Drive models indicated on the cover of this product manual have provisions for "Security of Data
Note at Rest" based on the standards defined by the Trusted Computing Group (see www.trustedcomputinggroup.org).
Seagate Enterprise Capacity 3.5 HDD v5 SAS Product Manual, Rev. F
Self-Encrypting 4KN
4KN models
ST8000NM0135
Self-Encrypting 512E
(SED) models
ST8000NM0085
ST6000NM0135
SED FIPS (140-2)
(SED) models 4KN models
ST8000NM0095 ST8000NM0125
ST6000NM0145
SED FIPS (140-2)
512E models
ST8000NM0135
6