BKI BLF-FC Installation & Operation Manual page 19

Electric Autolift Fryer Operation
Temperature Display, Temperature Adjustment & Relay Check – Once you press the [3SET] button again
the unit displays the current temperature. The following features are available in this mode:
Temperature Offset: The control can apply small temperature adjustments to compensate for probe
location within the equipment. Press and release the [2] button to add 1°F, press and release it again to
add another 1°F. Press and release the [5] button to subtract 1°F, press and release it more to subtract
more. The control limits the adjustment to ±10°F.
Relay Check: Pressing and releasing the [4] button turns relay K1 (heating relay) on. Press and release
the [4] button again to turn it off. Pressing and releasing the [6] button turns relay K2 (Pressure
solenoid/lift relay) on. Press and release the [6] button again to turn it off.
This mode can be very useful for testing a new piece of equipment by turning the heaters on and watching
the temperature rise (and/or current draw) to confirm proper heating operation and then using the fan relay
to cool the system down. Press and release the [3SET] button and the configuration wraps around back to
the Operating Mode display.
Once the configuration is complete turn the controller off and then back on again to begin using the
controller in its configured mode.
16