Table of Contents
Advertisement
Troubleshooting Guide
TROUBLESHOOTING GUIDES
This section of the manual contains troubleshooting information which will help the Certified Service Technician trou-
bleshoot a Wolf Cup Warming Drawer (CW24).
How to Use the General Troubleshooting Guide
Find the general fault in following table, note the possible causes, then attempt the recommend solutions in the
order they are presented.
Before continuing, take note of the WARNINGS and CAUTIONS at the bottom of this page.
IF REMOVING A CUP WARMING DRAWER FROM ITS INSTALLATION FOR TROUBLESHOOTING PUR-
-
POSES, REMEMBER THAT THE UNIT IS HEAVY AND COULD TIP AND/OR FALL WHEN PULLED FOR-
WARD. RESULTING IN SERIOUS INJURY OR DEATH.
TO AVOID ELECTRIC SHOCK, POWER TO THE UNIT MUST BE DISCONNECTED WHENEVER ACCESS-
-
ING AND/OR REMOVING COMPONENTS POWERED BY ELECTRICITY OR COMPONENTS NEAR OTHER
ELECTRICAL COMPONENTS. IF THE UNIT IS PLUGGED IN, BUT HAS NOT BEEN SWITCHED ON BY
PRESSING THE UNIT ON/OFF KEY, 115 VOLTS AC IS STILL PRESENT AT THE USER INTERFACE.
-
Metal edges may be sharp. Use caution when servicing unit to avoid personal injury.
-
The heating element can get very hot. To avoid personal injury use caution when servicing the unit,
making sure the heater has cooled before working on or around it.
#9001337 - Revision A - September, 2015
Cup Warming Drawer (CW24)
Cup Warming Drawer (CW24)
4-2
Advertisement
Table of Contents
