Installation; Package Contents; Before You Connect To The Network - D-Link Xstack DES-3528 Series Hardware Installation Manual

®
xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide

Installation

Package Contents

Before You Connect to the Network

Installing the Switch without the Rack
Installing the Switch in a Rack
Mounting the Switch in a Standard 19" Rack
Power On (AC Power)
Power Failure (AC Power)
Connecting DC Power to the DES-3528DC
Package Contents
Open the shi pping carton of the Switch and carefull y unpack its conte nts. Th e carton should contai n the following
items:
• One xStack
• One AC power cord*
• Regi stration card
• Mounting kit (two brackets and screws)
• Four rubber feet with adhesive backing
RS-232 console cable
•
If any item is found missing or damaged, please contact your local D-Link Reseller for replacement.
*
Please Note the DES-3528DC Switch does not require an AC power cord therefore none is provided.
Before You Connect to the Network
The site where you in stall the Switch may greatly affect its performance. Please follow these guidelines for setting up
the Switch.
• Install the Switch o n a sturdy, level surface that c
3528/DES-3528DC, at lea st 13.2 lb s (6 kg ) of weigh t fo r DES-3 552/DES-3528P, at least 1 5.4 lbs (7 kg) of
weight for DES-3552P. Do not place heavy objects on the Switch.
• The power outlet should be within 1.82 meters (6 feet) of the Switch.
• Visually inspect the power cord and see that it is fully secured to the AC power port.
• Make sure that there is proper he at dissipatio n from and adequat e ventilation arou nd the Switch. Leave at
least 10 cm (4 inches) of space at the front and rear of the Switch for ventilation.
• Install the Switch in a fairly cool and dry place for the acceptable temperature and humidity operating ranges.
• Install the Switch in a site free from st rong electromagnetic field generators (such as motors), vibration, dust,
and direct exposure to sunlight.
• When installing the Switch on a level surfa ce, attach the rubber feet to the bottom of the d evice. The ru bber
feet cushions help protect the casing from scratches and prevent it from scratching other surfaces.
®
stand-alone switch
Section 2
an su pport at least 6.6 lbs (3 kg) of
11
weight for DES-