Orbit 57896-50 rJ Quick Start Manual

2. MOUNT TIMER
MOUNTING TEMPLATE
4.17" GABARIT D`INSTALLATION
(106mm)
GUIA DE COLGAR
TIMER
QUICK START GUIDE
3
proof no: fl at: w: 9" dimensions: h: 7" meeting print production Printers are responsible for
date: 10.05.07 fi nished: w 9" d: 0" h 7" requirements. Any changes
des: SM spck: SM colors must be approved by the client and Fluid Studio.
job no: 07WTM005259 crop color color printed piece must meet
client: Orbit Registration non printing non printing on this form. designated specifi cations
sku: K PMS ???? ???? PMS ???? PMS
Use included mounting template p 801 295 9820 57880 work is the property of Fluid © 2007 Fluid Studio. This
f 801 951 5815 upc: ? ????? ????? ? additional instructions: Studio, and cannot be used,
www.fl uid-studio.net 1065 South 500 West fi le name: 57880-04 rA.indd 07WTM005259 · · in any way without their reproduced or distributed
Bountiful, Utah 84010 software: Illustrator CS2 express permission.
to mark screw locations.
PROGRAM
RAIN DELAY
RESET
AUTO
REQUIRED TOOLS:
Phillips Screwdriver
Wire Strippers
Note: The quick start guide is intended to help you
get up and running with your new timer. It includes
basic installation and programming help. For more
detailed and advanced instruction, please download
Screw through one of the
the full manual "Outdoor Swing Panel Timer" at
pre-formed mounting holes.
www.orbitonline.com
PN 57896-50 rJ
1. SELECT LOCATION
3. CONNECT SPRINKLER
Indoor
VALVES TO TIMER WIRES
PROGRAM
RAIN DELAY
RESET
AUTO
Common Wire
Wire Nut
Solenoid
Clean, dry, and out of direct sunlight
Allow 9 inch clearance for the swing door
Or
. . .
.
. Valve
. .
. .
.
.
.
.
. .
. Outdoor .
.
. .
. . . . .
.
Connect one of the two wires from each valve to the
common wire leading to the timer (usually white).
Connect the other wire from each valve to one of the
colored wires leading to the timer.
.
For detailed instructions on outdoor wiring, please download the
full manual "Outdoor Swing Panel Timer" at www.orbitonline.com
Warning: Check state and local codes. Orbit recommends using
a licensed electrical contractor for outdoor wiring of timer.
4. CONNECT VALVE WIRE 6. ACTIVATE BATTERY
TO TERMINAL
Keyhole
1/8"
Do not connect to power
source until after wiring
No. 8 Screw
valves to timer
Only connect one valve to
RESET
each terminal (station)
Pre-formed Wall
mounting holes
Hang timer on screw
Station 1
AUTO
using keyhole.
Strip wire
Push in
BATTERY WARNING: Chemical Burn Hazard. Keep
batteries away from children.
This product contains a lithium coin cell battery. If a
new or used button/coin cell battery is swallowed or
enters the body, it can cause severe internal burns
Level
and can lead to death in as little as two hours. Always
completely secure the battery compartment. If the
battery compartment does not close securely, stop
using the product, remove the battery, and keep it
away from children. If you think the battery might have
been swallowed or placed inside any part of the body,
seek immediate medical attention. The battery should
be disposed of properly and kept away from children.
Even used batteries may cause injury.
Push tab
upward to
release wire
5. CONNECT TO
ELECTRICAL POWER
Indoor
To
Timer
Button Function:
Outdoor
PROGRAM
RAIN DELAY
RESET
AUTO
.
Warning: See manual for outdoor wiring instructions
Dial Position Function:
I AUTO - Watering mode
J SET CLOCK - Set calendar and clock time
Remove plastic strip to
activate battery K SET DATE - Year, Month, and Day
PROGRAM
START TIME - Set time to begin watering
RAIN DELAY L
One Lithium CR2032 battery
(included) is required to retain
RUN TIME - Set watering duration for
M
the program in memory
each station
during power loss. Annual
replacement is recommended.
HOW OFTEN - Set frequency of
N
watering days
Remove the plastic strip to
activate the
pre-installed battery. BUDGET - Adjust overall watering as
O
a percentage
P OFF - Turn all stations off
7. PROGRAM TIMER
Set Current Time
A
(e.g. pacific, mountain standard)
Reset Battery
Turn dial to set clock enter current time (+/-)
C Set Date
B
PROGRAM
F
RAIN DELAY
RESET
SET
B G
DATE
E
D
AUTO
• Turn dial to SET DATE to enter the Year, Month and Day.
• Use the (+/-) button to select the Year.
A H • Press [ENTER] to advance to Month and Day.
Set Start Time
Swing C
Time to begin
Out Panel
Indicator
Release watering
A ENTER - To confirm a new setting
MANUAL - To water manually
• Turn dial to START TIME position.
• Enter one start time using the (+/-) button.
CLEAR - To clear a setting
B • Press the [ENTER] button to save.
Note: Additional start times – Additional start times can be
PROGRAM - to switch between
C entered if you want your sprinklers to water the same area
multiple times a day. For instructions please download the
programs - A, B, and C
"Outdoor Swing Panel Timer" manual at www.orbitonline.com.
ARROW [ ] - To skip to the next
D
setting / watering station or move to
D Select Watering Duration
other programs/settings
Set for each station
then press enter
ARROW [ ] - To go back to the
E
previous setting / watering station or
move to other programs/settings
F RAIN DELAY - To pause operation
for 24-72 hours due to rain or other
factors
Turn dial to run time enter the watering duration (+/- ) for each
station ([ENTER] or [ARROW] to move between stations).
G [+] - To increase a numeric setting
[ - ] - To decrease a numeric setting
H
BACKUP BATTERY
E Set Watering Days
or Interval
Your timer requires a CR2032 Lithium battery to maintain your
program in case of an AC power loss.
Tip: The Battery should be replaced every year, to avoid loss of
programming.
BATTERY WARNING: Chemical Burn Hazard. Keep
batteries away from children.
Turn dial to how often to select watering days ([ARROWS] This product contains a lithium coin cell battery. If a new
to move and [ENTER] to select). or used button/coin cell battery is swallowed or enters the
body, it can cause severe internal burns and can lead to
To water on Odd or Even days or to water using Intervals
death in as little as two hours. Always completely secure
days, please download the full manual "Outdoor Swing
the battery compartment. If the battery compartment does
Panel Timer" (at www.orbitonline.com) for instructions.
not close securely, stop using the product, remove the
battery, and keep it away from children. If you think the
battery might have been swallowed or placed inside any
Set Auto Mode
F
part of the body, seek immediate medical attention. The
battery should be disposed of properly and kept away from
children. Even used batteries may cause injury.
Note: A battery alone will not operate the valves in your sprinkling
system. The sprinkler timer transformer must be connected to an
AC line voltage source.
For instructions on "Water Budgeting", connecting the timer
Turn dial to AUTO—you have programmed your timer! to a "Pump Start" relay, replacing the "Backup Battery" or for
installing your timer outdoors, please download the full manual
"Outdoor Swing Panel Timer" at www.orbitonline.com
DOWNLOAD THE ORBIT
8. ADDITIONAL FEATURES B-HYVE LITE APP
RAIN DELAY Let the Orbit B-hyve Lite app take the guess work out of
programming your sprinkler timer.
Download the "Orbit B-hyve Lite" app.
After download, the app will guide you through setting up an
account and entering information about your landscape.
B-HYVE LITE APP FEATURES
• Turn dial to AUTO and Press the [RAIN DELAY] button.
• Push the [+/-] to select 24, 48 or 72 hours. Weather Alerts
Weather alert notifications on your smart device offer suggestions
• Press [ENTER] to begin.
for when to activate the rain delay feature or adjust programming.
• Press [CLEAR] to cancel the rain delay.
Programming Recommendations
MANUAL WATERING
Using historical local weather data and information about your
landscape, the B-hyve Lite app will make monthly programming
Your timer has the ability to allow you to manually water without recommendations customized to your yard.
disturbing the preset program.
Water Audit
Conduct your own watering audit—in app watering app tool allows
for up to 50% savings on water use—catch cup watering tool.
Save Water and Money
Based on historical weather data for your zip code, you will receive
recommendations on how to program your timer for optimal
watering throughout the season, saving water and money.
To Run all stations at the pre-programed duration
• Turn the dial to AUTO. Zone Identity
• Press the [MANUAL] button. Display will show A B and ALL. Name and photograph each of your watering zones making it easy
• Press [ENTER] (or wait a few seconds) to begin manual watering.
to identify each of your water areas.
All stations will water consecutively for their programmed
duration. *Upgrade easily to the B-hyve WiFi Sprinkler Timer and make
smart watering automatic while giving you control of your
To Run a specific station for specified time
sprinkler timer from anywhere in the world. The Orbit WiFi timer
• Turn the dial to AUTO.
communicates to the B-hyve cloud and automatically adjusts your
• Press the [MANUAL] button.
sprinkler programming throughout the watering season. B-hyve
• Press the [ / ] buttons until desired station number appears.
WiFi timers are EPA WaterSense certified and may be eligible for
• Press the [+/–] to enter the desired duration.
rebates in your area.
• Press [ENTER] (or wait a few seconds) to begin manual watering.
To stop Manual Watering press [CLEAR].
**The easy-set-logic timer is not wifi enabled. The B-hyve Lite
Note: After the [MANUAL] button has been pushed, if a selection app offers programming set-up and adjustments you can manually
is not made within 5 seconds all stations and programs will begin enter to potentially improve your watering performance.
watering using the programmed RUN TIMES. If no RUN TIMES
have been set, nothing will happen and the display will return to
the time of day.
HELP
1-800-488-6156 or 1-801-299-5555
www.orbitonline.com
Before returning this sprinkler timer to the store, contact Orbit ®
Technical Service at: 1-800-488-6156, 1-801-299-5555.
LISTINGS
The sprinkler timer is tested to UL60730 standard & is ETL ® listed.
Appropriate international models are CSA ® and CE ® approved.
This Class B digital apparatus complies with Canadian ICES-003.
Disconnection : Type 1Y
Input: 120V, 60Hz, 0.2A; Output: 26V, 5OOmA
Rated impulse voltage: 2500V
Pollution degree: 2
The supply cord of this control can be replaced only by the
manufacturer or his accredited service agent.
NOTICE
The information in this manual is primarily intended for the user
who will establish a watering schedule and enter that schedule
into the sprinkler timer. This product is intended to be used as an
automatic sprinkler timer for activating 24 VAC irrigation valves, as
described in this manual.
WARRANTY AND STATEMENT
Orbit ® Irrigation Products, Inc. warrants to its customers that its
products will be free from defects in materials and workmanship
for a period of six years from the date of purchase.
We will replace, free of charge, the defective part or parts found to
be defective under normal use and service for a period of up to six
years after purchase (proof of purchase required).
We reserve the right to inspect the defective part prior to
replacement.
Orbit ® Irrigation Products, Inc. will not be responsible for
consequential or incidental cost or damage caused by the product
failure. Orbit liability under this warranty is limited solely to the
®
replacement or repair of defective parts.
To exercise your warranty, return the unit to your dealer with a copy
of the sales receipt.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: This appliance is not intended for use by young children
or infirm persons without supervision. Young children should be
supervised to ensure that they do not play with the appliance.