Superior Fireplaces DRL4500 Series Installation And Operation Instructions For page 29

Figure 39 - Removing Mount Bracket for See-Thru Applications
Removing False Door
1. In the rear of the fireplace, remove false door just as you would
remove the front glass door. Refer to Removing/Replacing Glass
Door, page 27 of this manual for instruction. Discard false door.
Removing Rear Interior Wall
1. Remove glass door from front of fireplace. Refer to Removing/
Replacing Glass Door, page 27 of this manual when removing
glass door.
2. Unscrew 4 corner brackets from the firebox top (See Figure 40).
3. Remove 2 side walls and then the rear wall. Discard rear wall.
4. Replace 2 side walls and reinstall the corner brackets.
5. Reinstall front glass door.
Installing Second Glass Door
1. Install second glass door in the rear of the fireplace refer to Re-
moving/Replacing Glass Door, page 27 of this manual.
Installing Access Door Retaining Brackets
1. Screw access door retaining brackets into the inner side face using
2 screws on both the left and right side as shown in Figure 41.
Installing Side Face Filler
1. Screw side face filler into firebox side baffle using 2 screws on
both the left and right side as shown in Figure 42.
Figure 40 - Removing Rear Interior Wall for See-Thru
Applications
126718-01_G
FIREPLACE INSTALLATION Continued
Rear Panel
Bracket
Side Panel
Superiorfireplaces.US.com
Retaining
Bracket
Figure 41 - Installing Access Door Retaining Brackets for See-
Thru Applications
Figure 42 - Installing Side Face Filler for See-Thru Applications
Installing Access Door
1. Place access door into rectangular opening in front of the glass
door with the slanted side facing forward. The slanted surface will
slide underneath the flange of the bottom face Insert tabs on side
of access door into slots on retaining brackets (See Figure 43).
Side Filler
Retaining
Bracket
Flange on
Face Bottom
Figure 43 - Access Door for See-Thru Applications
Access Door
29