Removing And Replacing Chassis Components; Removing The Exterior Cosmetics; Prerequisites; Required Tools And Equipment - Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Manual

Removing and Replacing Chassis Components

This chapter provides instructions on how to remove and replace components in the Cisco NCS 6000 Fabric
Card Chassis (FCC).
•
•
•
•

Removing the Exterior Cosmetics

This section describes how to remove the front side and rear side exterior cosmetics on the FCC. We recommend
that you remove the cosmetics in the order outlined in this section.
Note While it is possible to remove most of the cosmetic parts on the FCC separately, some parts (such as the
vertical cable trough) require that other parts be removed first.

Prerequisites

Ensure that you have all the original packaging material that shipped with the FCC, or any other packaging
suitable for packing the cosmetics.

Required Tools and Equipment

• 8-inch, Number-1 Phillips screwdriver (magnetic head preferable)
Removing the Exterior Cosmetics , page 87
Removing the Power Components, page 96
Replacing the Fan Trays and Air Filter, page 110
Removing the Shelf Controller Cards and Fabric Cards, page 115
Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide
6
C H A P T E R
87