Chapter 6 Removing And Replacing Chassis Components; Removing And Replacing Chassis Components; Removing A Line Card - Cisco NCS 4000 Series Hardware Installation

Removing and Replacing Chassis Components

This chapter provides instructions on how to remove and replace components from the Cisco NCS 4016
chassis.
•
Removing and Replacing Chassis Components

Removing a Line Card

This section describes how to remove a line card from the Cisco NCS 4016 chassis.
Class 1 Laser Product. Statement 113
Warning
Because invisible radiation may be emitted from the aperture of the port when no fiber cable is
Warning
connected, avoid exposure to radiation and do not stare into open apertures. Statement 125
For diverging beams, viewing the laser output with certain optical instruments within a distance of
Warning
100 mm may pose an eye hazard. For collimated beams, viewing the laser output with certain optical
instruments designed for use at a distance may pose an eye hazard. Statement 282
Prerequisites
Before performing this task, open the front door, if installed.
Removing and Replacing Chassis Components, page 97
6
C H A P T E R
Hardware Installation Guide for Cisco NCS 4000 Series
97