Specifications; Door Preparation - Schlage Door Locks Brochure & Specs

Specifications

Handing:
Not handed, except Flair design.
Door Thickness:
1 " to 2 "
(35 mm-51 mm)
except S40D: 1 to 1
(35 mm-48 mm)
Backset:
Universal backset latches standard, fit either 2 "
or 2 " . 5"
(60 mm) (70 mm) (127 mm)
Fronts:
Steel. 1 ˝ x 2 ˝
(29 mm x 57 mm)
beveled, for 2 ˝ backset standard. For availability with
specific backsets, see page 6.
Lock Chassis:
Tubular construction. Zinc with steel cover.
Latch Bolt:
Brass, chrome plated, ˝ (
13 mm)
Exposed Trim:
Levers are zinc base, plated to match finish symbols.
Roses, latch faceplates and strikes are wrought brass or
bronze.
Strike:
T-strike 1 ˝ x 2 ˝ (29 mm x 70 mm) x 1 ˝ (29 mm)
lip to center with box standard. Optional strikes, lip
lengths and ANSI strike box available. See page 7.
Cylinder & Keys:
Commercial: 6-pin patented Everest C123 keyway stan-
dard with two nickel silver keys per lock.
Residential: 6-pin C keyway, keyed 5-pin.
Keying Options:
Interchangeable core and Primus
cylinders. Master keying, grand master keying,
and construction keying.
Warranty:
Commercial: three-year limited.
Residential: Full mechanical lifetime.

Door Preparation

optional.
square corner,
throw, deadlocking.
high security
®
Certifications
ANSI
Meets or exceeds A156.2 Series 4000, Grade 2
strength and operational requirements.
Federal
Meets FF-H-106C.
California State Reference Code
(Formerly Title 19, California State Fire Marshal Standard)
Neptune and Saturn designs comply; levers return to
within ˝ of door face.
UL / cUL:
All locks listed for A label single doors, 4´ x 8´.
Letter F and UL symbol on latch front indicate listing.
UL437 Listed locking cylinder optional: specify
Primus 20-500 Series cylinder.
S
S E R I E S
1