Sceptre X19 User Manual page 37

Problems Solutions
HDCP VIDEO SAYS NO Reboot your HDCP video device but turning them off and unplugging the
HDCP SUPPORT power cord. Wait up to 8 minutes to plug the power back in to see if it
works or not.
Make sure you have a 3.5 mm mini-jack cable connected from your
HDCP VIDEO HAS NO HDCP video device's sound output to the TV's VGA STEREO INPUT. If
AUDIO your HDCP video device uses RCA AUDIO jacks, you'll need to obtain a
RCA audio converted into 3.5 mm mini-jack cable.
CANNOT GET 1440x900 is a widescreen resolution. If your video card cannot achieve
1440x900 ON PC VGA the resolution, please try updating the video card's drivers to the newest
version. If that does not work, you'll need to think about upgrade the
video card to one that is capable of achieving that resolution.
PICTURE IS This might be from interference from large electrical appliances, cars,
DISTORTED OR HAS motorcycles, or fluorescent lights. If the TV is close to the wall, try
ABNORMAL SOUND moving the TV to another room in your house to see if the problem still
occurs.
If you're using HDMI or a TV digital channel make sure you use the
ASPECT button to switch to FULL format. If you are using VGA, use the
AUTO ADJUST function to adjust to the screen. Please Note : If you
PICTURE DOES NOT are using regular analog TV, AV, or component in 480i resolution, use
COVER THE ENTIRE the ASPECT button to switch to FULL in order to fill up the screen.
SCREEN Please Note : This note this feature will distort the picture.
For best image quality, view HD widescreen programs where possible. If
HD content is not available view "Standard Definition" from a digital
PICTURE QUALITY IS source. Standard, analog TV will always be noticeable inferior to HD
HORRIBLE!! because your X19 LCD HDTV has video that is many times better than
old TV's and so you can see interference and deficiencies you did not
KNOW you had.
PICTURE HAS PIXELS Your X19 LCD HDTV is manufactured using an extremely high level of
THAT ARE ALWAYS precision technology, however, sometimes some pixels of your X19 LCD
DISPLAYING THE HDTV may not display. Pixels defects within industry specifications are
SAME COLOR inherent to this type of product and do not constitute a defective product.
SWITCHING A CHANNEL Different channels and inputs will sometimes have this effect because
OR SOURCE CHANGES the channel signal's own volume is already loud. There is no way
THE VOLUME remove this completely. The TV has an AUTO VOLUME LEVEL
function that can combat this type of effect. Please make sure that
function is turned on.
THERE IS NOISE OR When your LCD HDTV's resolution is higher than the digital channel's
TRASH PIXELS ON THE broadcast resolution, the signal is up-converted to match your TV's
SCREEN resolution. Up-converting can cause this type of effect.
TIPS FOR HIGH The X19 LCD HDTV is an ideal platform for viewing High Definition
DEFINITION USERS Content. The best image quality can be achieved by HDMI, YPbPr
(Component), then VGA. However, due to variances in broadcast
practices, it is possible some image distortions can occur.
TIPS FOR LETTERBOX Letterboxed (Widescreen) versions of DVD movies are most commonly
CONTENT USERS formatted for standard 4:3 TVs. The X19 LCD HDTV has the capability
of expanding this content so the entire screen is filled at the expense of
the image proportion. To use this function press the aspect button on
the remote control and cycle among the available options.
I CANNOT FIND THE The buttons are represented by the ▲▼◄► buttons located on the
VOLUME AND CHANNEL remote control. ▲▼ changes the channels and ◄► changes the
CHANGING BUTTONS volume.
The enter button has the symbol ↵. It is located in the center of the
I CANNOT FIND ENTER
BUTTON ▲▼◄► buttons.
TV TURNS OFF The TV features a power saving mode which will automatically turn off
AUTOMATICALLY the TV, if there's no signal provided for more than 5 minutes.
AFTER 5 MINUTES
SCEPTRE X19 HDTV User Manual
- 37 -
www.SCEPTRE.com