Side Control Buttons; Rear View Mounting Pattern - Sceptre X19 User Manual

Side Control Buttons

1. VOL(–) – This button decreases the TV's volume. If a OSD menu is active,
pressing this button will move the selection to the left.
2. VOL(+) – This button increases the TV's volume. If a OSD menu is active,
pressing this button will move the selection to the right.
3. CH ▼– This button changes the TV channel downward. If the OSD menu is active,
this button functions as down control for the menu.
4. CH▲ – This button changes the TV channel upward. If the OSD menu is active,
this button functions as up control for the menu.
5. MENU – This button activates the On Screen Display (OSD) menu. If a sub-menu
is active, pressing this button will return selection to the previous menu level.
6. SOURCE – This button switches between all the different sources of the TV. The
switching sequence is as follows: TV, AV, S-Video, YPbPr, VGA, and HDMI. When
the OSD is active, this button acts as the enter button and confirms the menu
selection.
7. POWER – Turn on the TV by pressing the button once. Press the button again to
turn off the TV.

Rear View Mounting Pattern

Mounting Specification: 100mm x 100mm using screw M4 (12mm) diameter screws.
SCEPTRE X19 HDTV User Manual
- 11 -
www.SCEPTRE.com