Connecting Cable Or Satellite Boxes With Hdmi - Sceptre X19 User Manual

5. Turn on the X19 LCD HDTV and your DVD player.
6. Use the remote control's source button or the source button on the TV to switch to AV.
Please Note :
•
Make sure the yellow connector in the same group is not connected. You
can only connect either the S-Video port or the Yellow Connector port. DO
NOT CONNECT BOTH.
•
Please reference the DVD player's manual as well, to make sure the DVD
player is configured to output correctly to the TV.

Connecting Cable or Satellite boxes with HDMI...

1. Make sure the power of X19 LCD HDTV and your set-top box is turned off.
2. Connect a HDMI cable to the HDMI output of your set-top box and the other end to the
HDMI port on the back of your X19 LCD HDTV.
3. Turn on the X19 LCD HDTV and your set-top box.
4. Use the remote control's source button or the source button on the TV to switch to HDMI.
Please Note :
•
Please reference the set-top box's manual, to make sure the set-top box is
configured to output correctly to the TV.
•
Sceptre's X19 LCD HDTV supports SONY's universal remote code.
Please look up SONY's codes in your universal remote's hand book.
SCEPTRE X19 HDTV User Manual
- 19 -
www.SCEPTRE.com