Operating Instructions; Section 4 - Operating Instructions; Controls And Instrument Identification - Scag Power Equipment Wildcat STWC52V-26KA-LC Operator's Manual

R
CAUTION
Do not attempt to operate this mower unless you
have read this manual. Learn the location and
purpose of all controls and instruments before
you operate this mower.
4.1 CONTROLS AND INSTRUMENT
IDENTIFICATION
Before operating the mower, familiarize yourself with all
mower and engine controls. Knowing the location, function
and operation of these controls is important for safe and
efficient operation of the mower.
1. Ignition Switch (Figure 4-1).
is used to start the engine and has three positions;
OFF, ON, and START.
PARKING
ENGINE THROTTLE CONTROL
MOWER
DECK
SWITCH
IGNITION
SWITCH
ENGINE
CHOKE
CONTROL
FUEL SWITCHING

OPERATING INSTRUCTIONS

The ignition switch
LEFT STEERING
CONTROL
BRAKE
FUSES
VALVE
Figure 4-1.
2. Mower Deck Switch (Figure 4-1).
and disengage the mower drive system. Pulling up
on the switch will engage the deck drive. Pushing
down on the switch will disengage the deck drive.
3. Engine Choke Control (Figure 4-1).
a cold engine.
4. Engine Throttle Control (Figure 4-1).
control the engine speed. Pushing the lever forward
increases engine speed. Pulling the lever back
decreases engine speed. Full back position is the
IDLE position. Full forward is the cutting position.
5. Hourmeter (Figure 4-1).
hours the engine has been operated. It only operates
when the engine is running. Has preset maintenance
reminders for engine and hydraulic system oil
changes. Will start flashing scheduled maintenance
2 hours before preset time and continue flashing
until 2 hours after. Automatically resets.
DECK LIFT
DUMP
VALVE
STC 2007 CAI
Controls and Instruments
12
Used to engage
Indicates the number of
CUTTING HEIGHT
ADJUSTMENT
RIGHT STEERING
CONTROL
CUTTER DECK
RELEASE LEVER
SEAT BELT
HOUR METER
SEAT HOLD DOWN
RELEASE LATCH
Section 4
Used to start
Used to