Garmin nuvi 700 series Owner's Manual page 59

Problem/Question
How do I know my nüvi
is in USB Mass Storage
Mode?
My computer never
senses that the nüvi is
connected.
I cannot see any new
removable drives in my
list of drives.
I cannot get traffic
information.
nüvi 700 Series Owner's Manual
When your nüvi is in USB Mass Storage Mode, a picture of a nüvi
connected to a computer is shown. Also, you should see two new
removable disk drives listed in
1. Unplug the USB cable from your computer.
2. Turn the nüvi off.
3. Plug the USB cable into your computer and your nüvi. The
nüvi automatically turns on and goes into USB Mass Storage
Mode.
If you have several network drives mapped on your computer,
Windows may have trouble assigning drive letters to your nüvi
drives. See your operating system's help file to learn how to
map/assign drive letters.
Verify that you are in a coverage area. You must be in a coverage
area to get the traffic information for that area.
Verify that the FM TMC Traffic receiver is connected to the power
connector on the cradle and also connected to a power outlet in
your vehicle. (Traffic receiver included in some nüvi 710, 750T,
760, 770 packages.)
Solution/Answer
My Computer.
carinG