Look-Down And Walk Test; Look-Down Zone; Walk Test Led - Bosch Professional Series Reference Manual

Professional Series TriTech AM Motion Detectors
with Anti-mask, LSN
7

Look-down and walk test

7.1

Look-down zone

The detector has a manual cam to enable or disable the look-down zone. Enable the look-
down zone to detect motion under the detector area.
To reduce false alarms, disable the look-down lens for locations where small animals are likely
to cross the look-down zone.
Turn left to disable the look-down zone. Turn right to enable the look-down zone.
7.2

Walk test LED

The walk test LED indicates the detector's operational status.
2 min
Bosch Building Technologies
During the warm-up period (after providing power to the
device), the LED flashes continuously until the device is
ready for use.
During walk test, the LED indicates PIR and microwave
activity activity and also a motion alarm condition (dual
alarm).
If the detector is in a self test fault condition, the LED
flashes 4 times repeatedly.
Reference Manual
Look-down and walk test | en
2018.10 | 01 | F.01U.352.414
17