Advertisement
STEP 1
In the Home close to Wi-Fi Router:
1.
Remove mounting bracket from back of DCM. FIG.A,
2.
Plug Aladdin Connect™ into wall outlet with Power Pack.
FIG. B.
3.
Plug Power Pack into DCM controller.
DCM
FIG.A
FIG.B
NOTE: Customers using control apps from other vendors and NOT
using the Aladdin Connect™ app to control this system will need to
visit www.GenieCompany.com/AladdinConnect for specific Wi-Fi
instructions.
STEP 2
In the Home close to Wi-Fi Router:
Download the Aladdin Connect™ app.
1.
Scan the QR code below or visit your devices app store
to start the setup of the Aladdin Connect™ device.
Search your app store for Aladdin Connect
2.
Follow the on-screen menus to create an account and
program system prior to wiring in the garage.
3.
At the installation prompt, disconnect
Power Pack and move system to the garage.
Scan for
iOS app
Android app
Apple and the Apple logo are trademarks
of Apple Inc., registered in the U.S. and
other countries. App Store is a service mark
of Apple Inc.
Installation Prompt
Scan for
3
Advertisement
