Appendix A Basic Specification; Dr300 General Specifications - SATO DR300 Operator's Manual

DR300 Operator Manual
DR 300 General Specifications
Head Density 8 dots/mm
Print Method Thermal Transfer/Direct Thermal
CPU 32-bit RISC CPU
Print Speed 75, 100, 125 mm/second (Selectable)
Bar Code Type UPC-A/E
Code 39
Bookland
2D: PDF417, Data Matrix, Vericode, QR code, Maxicode3
*2D barcode: online printing only
Bar Code Ratio 1:2, 1:3, 2:5 (Software defined)
Font 1-9 times (Both horizontally and vertically)
Expansion
Font Type U – Font**
S – Font**
M – Font**
OCR – A Font
OCR – B Font
WB – Font
WL – Font
**IBM 850 Code Set Table
Print Area Max W 80 mm x P 178 mm
Label Size Width 32 – 80 mm
(Label size is inclusive of label web)
Label 0.1 – 0.26 mm
Thickness
Operation Key: LINE Key, FEED Key
Panel LCD: 8 digits x 2 lines (English character display, Black Lit)
STATUS: 2 – colour LED (Red, Green)
Adjustment PRINT
VR PITCH
OFFSET
User Mode 1. Print Darkness
2. Print Position Adjustment
3. Print Speed
4. Offset Adjustment
APPENDIX A
Basic Specification
EAN-8
ITF2/5 Code 128 UCC/EAN128
W5xP9
W17xP17
W24xP24
W19xP22
W20xP24
W48xP48
W48xP48
Pitch 19 – 181 mm
(only applicable to On-line use)
: Print Darkness
: Print Pitch
: Print Offset
EAN-13 NW7
(Alphanumeric, notation)
(Alphanumeric, notation)
(Alphanumeric, notation)
(Alphanumeric, notation)
(Alphanumeric, notation)
(Alphanumeric, notation)
(Alphanumeric, notation)
Appendix A
85