SATO GL408e / GL412e Quick Start Manual page 15

Fig. 5 Operation panel
1 LED:
POWER (lights up when the power is on)
ONLINE (lights up when communication is available, flashes
when communication fails)
STATUS (lights up and flashes when an error occurs, flashes
when the printer is sending/receiving data)
LABEL (lights up and flashes when a paper error occurs)
RIBBON (lights up and flashes when a ribbon error occurs)
2 Display
Back lighted LCD display icons, operation and error
messages.
3 LINE button
Toggles the printer between ONLINE and OFFLINE modes.
4 FEED button
Advances the media one label length in ONLINE and
OFFLINE mode. If there is data in the printer, the printer will
print the data before ejecting the label.
Use this button to line up the label to a proper print position.
5 CANCEL button
Cancels printing data. In each setting mode, you can return to
the previous setting item.
6 ENTER button
Confirms the choice of a selection or value and advances the
setting menus.
7 Direction keys
These keys move cursor only when the printer is OFFLINE.
While you are in setting menu, you can enter numbers by
incrementing / decrementing and move cursor to wished
parameter section.
8 FUNCTION button
With each setting mode, you can return to the mode selection
screen.
12
GL408e / GL412e Barcode Thermal Printer
Overview