Operator Panel - SATO CT400 Operator And Technical Reference Manual

Section 2. Installation and Configuration

OPERATOR PANEL

The Operator Panel consists of three LED indicators and three switches.
POWER
ERROR
ON LINE
ON LINE KEY
FEED KEY
POWER
SATO CT Series Printers
POWER
LED
ERROR
LED
ON LINE
LED
ON LINE
Key
FEED
Key
POWER
Switch
Green LED, illuminated when power is applied.
Red LED, illuminated when there is a system fault
such as an open print head.
Green LED, illuminated when the printer is ON LINE
and ready to receive data. The printer is placed ON
LINE and OFF LINE by toggling the ON LINE key.
If the ONLINE LED is illuminated, pressing this switch
will place the printer in the OFFLINE mode. Pressing
the switch again will place the printer back in the
ONLINE mode. If this switch is pressed while the
printer is printing, the printing process is suspended.
To resume printing, press this switch again. When the
printer is ON LINE, it is ready to receive data from the
host. When it is OFF LINE, the printer will not receive
data from the host or print.
Feeds one label when pressed in the OFFLINE mode.
If this switch is held in the depressed position while
power is applied, a printer status label will be printed.
A two position switch that applies power to the printer.
When the "0" position is pressed, power is removed
from the printer. When the "1" position is pressed,
power is applied to the printer.
9001069A Page 2-11