ZyXEL Communications Multy Plus User Manual page 9

Chapter 1 Get to Know Your Multy Plus WiFi System
Figure 1 Multy Device LED
The following are the LED descriptions for your Multy Device.
Table 1 Multy Device LED Behavior
COLOR STATUS
Off
White Blinking
On
Blue Blinking
On
Red On
Slow Blinking
Fast Blinking
DESCRIPTION
The Multy Device is not receiving power.
The Multy Device is booting up, undergoing firmware upgrade, or being
configured.
The Primary Multy Device is on and connected to the Internet.
The secondary Multy Device has successfully connected with the Primary AP.
Bluetooth is enabled on the Multy Device.
The Primary Multy Device is configuring with the second/other AP.
The Primary Multy Device in AP mode failed to connect to the Internet.
The second/other Multy Device disconnected or failed to connect to the
Primary AP.
Bluetooth is not working on the Multy Device.
The Multy Device had a system error.
An error occurred during firmware update.
The Multy Device is in the process of default restoring.
Multy Plus WiFi System User's Guide
9