Table of Contents
Advertisement
If you are installing the first Multy Device, connect the Internet port of the Multy Device to a LAN port of
2
a broadband modem or router that is connected to the Internet.
1.5 Reset Button
If you need to set the Multy Device back to its default settings, use the Reset button on the rear panel.
1.5.1 Use the RESET Button
Make sure the LED is not blinking white.
1
Press the RESET button for longer than five seconds to set the Multy Device back to its factory-default
2
configurations. The LED starts to blink red.
1.6 LED (Light)
Look at the LED on the top panel to determine the status of the Multy Device.
Chapter 1 Get to Know Your Multy Plus WiFi System
Multy Plus WiFi System User's Guide
8
Advertisement
Table of Contents
