Table of Contents
Advertisement
Chapter 2 Set up Your Multy Plus WiFi System Using Web Configurator
2.13 Change Your Multy Device Operating Mode
The operating mode refers to how the Multy Device is being used in the network. The Multy Device has
two operating modes:
• Router: This is the Multy Device's default mode. In this mode, the Multy Device routes traffic between
a local network and another network such as the Internet.
• Access Point: Use this mode so the Multy Device bridges traffic between clients on the same network.
Note: Parental Control, UPnP, Port Forwarding, DMZ are not available in Access Point mode.
Click the Navigation Panel icon on the top-left corner (
). From the Settings drop-down list, click
1
Maintenance, then click the Operating Mode tab. Select the operating mode and select APPLY to save
your changes. Changing the Multy Device's operating mode may take up to two minutes.
Multy Plus WiFi System User's Guide
35
Advertisement
Table of Contents
