Asus rog crosshair vii hero Manual page 81

M.2_1 Link Mode
This item allows you to set the link speed for M.2_1 Device.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]
M.2_2 Link Mode
This item allows you to set the link speed for M.2_2 Device.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]
SB Link Mode
This item allows you to set the link speed for Southbridge.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]
Asmedia USB 3.1 Controller
[Disabled] Disables the controller.
[Enabled] Enables the rear USB 3.1 Gen 2 controller.
The following item appears only when you set the Asmedia USB 3.1 Controller to
[Enabled].
USB Type C Power Switch
[Auto] The system will automatically detect your USB Type C devices and provide
suitable power if needed.
[Enabled] The USB Type C port will always provide power to your devices.
RGB LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
Configuration options: [On] [Off]
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states.
Configuration options: [On] [Off]
Intel LAN Controller
This item allows you to enable or disable the Intel LAN controllers.
Configuration options: [Disabled] [Enabled]
Wi-Fi Controller
This item allows you to enable or disable the Wi-Fi controller.
Configuration options: [Disabled] [Enabled]
Bluetooth Controller
This item allows you to enable or disable the Intel Bluetooth controller.
Configuration options: [Disabled] [Enabled]
ROG CROSSHAIR VII HERO (WI-FI)
3-17