Theben SUL 181 h Operating Instructions page 2

i manual
i
permanent ON / OFF
EMV / CEM / EMC / ETY
The time switches are in accordance with the European direc-
tives 73/23/EEC. (Low-Voltage Directive) and 89/336/EEC (EMC-
Directive). If the time switches are used together with other devi-
ces in an installation, take care that the complete installation
does not cause a radio interference.
Service
Theben AG
Postfach 56, D-72394 Haigerloch
Telefon (0 74 74) 692-0, Telefax: (0 74 74) 692 150
Kundendienst
Telefon (0 74 74) 692-177, Telefax (0 74 74) 692-207 www.theben.de
Manual Control ON/OFF (Override Control)
Turn the control axis
+ or OFF = -. The manual control is automatically
annuled by the following counteracting command of the automatic
program sequence.
Permanent Control ON/OFF
Set the hand lever
control axis
trol ON or OFF can now be adjusted. Turning the hand lever to
»Auto« = Automatic Control, the permanent control is terminated.
The actual switch position is maintained until the next counterac-
ting command of the automatic program sequence is triggered. An
immediate correction can be carried out by means of the manual
control (override control).
TIMEGUARD LTD,
Victory Park, 400 Edgware Road
London NW2 6ND
Tel. 0181/4508944;
Fax: 0181/4525143
in direction of arrow by one notch; ON=
to »perm« = permanent control; turning the
in direction of arrow, the required permanent con-
AUS
PETER WARBURTON PTY. LIMITED,
64 Brittania Road, Castle Hill
NSW 2154, Australia,
Tel.: (02) 9899 2908,
Fax: (02) 9899 4486