Top Control - Sanyo PLC-XW65K Owner's Manual

Part Names and Functions Part Names and Functions

Top Control

SELECT button
q
– Execute the selected item. (p.21)
– Expand or compress the image in Digital zoom
mode. (p.36)
POINT ( ) buttons
ed
w
– Select an item or adjust the value in the
On-Screen Menu. (p.21)
– Pan the image in Digital zoom + mode.
(p.36)
AUTO SETUP button
e
Execute the setting of Auto setup (includes
Input search, Auto PC adj. and Auto Keystone
functions) in the setting menu. (p.23, 46).
POWER ON/STAND-By button
r
Turn the projector on or off. (p.18, 20)
WARNING indicator
t
Emit a red light when the projector detects
an abnormal condition. This also blinks red
when the internal temperature of the projector
exceeds the operating range. (p.57, 69)
10
o
i
u
y
t
r
e
w
q
LAMP REPLACE indicator
y
Turn yellow when the life of the projection lamp
draws to an end. (p.60, 69)
MENU button
u
Open or close the On-Screen Menu. (p.21)
POINT ( ) buttons
7 8
i
– Select an item or adjust the value in the
On-Screen Menu. (p.21)
– Pan the image in Digital zoom + mode.
(p.36)
– Adjust the volume level. (p.24)
POWER indicator
o
– Lights red when the projector is in stand-by
mode.
– Lights green during operations.
– Blinks green in the Power management mode
(p.51).