Sanyo PLC-XW65K Owner's Manual page 54

Setting
To Enter the PIN code
Select a number by pressing the Point
then press the Point
8
the pointer. The number changes to "✳". If you fixed an
incorrect number, move the pointer to the number you want
to correct by pressing the Point
the correct number by pressing the Point
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
"Set" by pressing the Point
button so that you can change the following PIN code lock
settings.
If you entered an incorrect PIN code, "PIN code" and the
number (✳✳✳✳) turns red. Enter a correct PIN code all
over again.
To Change the PIN code lock setting
Select Off, On1, or On2 with the Point
then move the red framed pointer to "Quit" with the Point
button. Press the SELECT button to close the dialog box.
To Change the PIN code
The PIN code can be changed to your desired four-digit
number.
Select "PIN code change" with the Point
press the SELECT button to display the New PIN code
input dialog box.
Select a number by pressing the Point
then press the Point
8
the pointer. Repeat it to complete entering a four-digit
number. After entering the four-digit number, move the
pointer to "Set" by pressing the Point
the SELECT button.
CAUTION:
WHEN yOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE IN COLUMN OF THE
PIN CODE NO . MEMO ON PAGE 74, AND KEEP IT
SECURELy . IF yOU FORGET yOUR PIN CODE, THE
PROjECTOR CAN NO LONGER BE STARTED .
54
ed buttons. And
button to fix the number and move
7 button, and then select
buttons.
ed
8 button. Press the SELECT
7 8
d
buttons. And
ed
button to fix the number and move
button. Then press
8
Enter a PIN code
buttons and
d
Change the PIN code lock setting
button, and
Change the PIN code
The input numbers change to "✳
" for security.
Move the pointer to "Set" by pressing
the Point button. And then press the
8
SELECT button.
Select a desired setting with the
Point 7 8 buttons.
Select PIN code change and press
the SELECT button. The New
PIN code input dialog box appears.
The input numbers are being
displayed for confirmation.