Appearance And Function Of Control Panel - Royal Sovereign ARP-51400HA Owner's Manual

appeaRance and functIon of contRol panel

1. POWER
2. TEMP-
3. SLEEP
4. SPEED
5. SWING
6. TEMP+
7. TIMER
8. MODE
9. LOW FAN
10.SLEEP INDICATOR
11. TIMER INDICATOR
1. POWER KEY
Press to turn unit "ON" or "OFF".
2. TEMP- (DOWN)
During cooling function: This button lowers the preset temperature by 1℃(1℉)∙each∙time∙it∙is∙pressed∙and∙the∙
minimum setting is16℃(62℉).∙During∙heating∙function:∙This∙key∙lowers∙the∙preset∙temperature∙by∙1℃∙(1℉)∙
each time and the minimum setting is16℃(62℉).
3. SLEEP CONTROL FUNCTION
1. While in cooling mode, press the SLEEP key to set the temperature. It increases1℃∙(1℉)∙after∙an∙hour∙and∙
at most increases 2℃(2℉)∙after∙2∙hours.
2. While in heating mode, press the SLEEP key to set the temperature. It decreases 1℃(1℉)after∙an∙hour∙and∙
at most decreases 2℃∙(2℉)∙after∙2∙hours.
3. Press the SLEEP button again can cancel the setting.
4. SPEED
Press to select either LOW, MEDIUM, or HIGH fan speed.
note: In dehumidifying setting, this button does not function as the unit is defined to be low speed in dehumidifying mode.
5. SWING(air flow)
Press this button after the machine is 'ON' to adjust the air flow. The louver will swing continuously left to right.
Press this button a second time and the louver will stop.
6
12. COOL
13. DEHUMIDIFY
14. HIGH FAN SETTING
15. MUDIUM FAN
16. WIFI INDICATOR
17. WATER FULL
18. FAN
19. SWING INDICATOR
20. LED DISPLAY
21. FRESH INDICATOR
22. HEAT INDICATOR