Top Control - Sanyo PLC-XU300 Owner's Manual

Part Names and Functions

Top Control

① SELECT button
– E xecute the selected item (p.21).
– E xpand or compress the image in the Digital zoom
mode (p.36).
② POINT ed 7 8 (VOLUME +/–) buttons
– S elect an item or adjust the value in the On-Screen
Menu (p.21).
– P an the image in the Digital zoom +/- mode (p.36).
– A djust the volume level (Point 7 8 buttons) (p.24).
③ INPUT button
Select an input source (pp.27-28, 37-38).
④ ON/STAND–By button
Turn the projector on or off (pp.18-20).
⑤ POwER indicator
– L ights red when the projector is in stand-by mode.
– L ights green during operations.
– B links green in the Power management mode
(p.51).
⑥ MENU button
Open or close the On-Screen Menu (p.21).
10
⑨
⑧
⑦
⑥
⑦ AUTO SETUP button
Correct vertical keystone distortion and adjust
computer display parameters such as Fine sync.,
Total dots, and Picture position (pp.23, 45).
⑧ wARNING indicator
– L ights red when the projector detects an abnormal
condition.
– B links red when the internal temperature of the
projector exceeds the operating range (pp.59, 70).
⑨ LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.62, 70).
⑤
④
③
②
①