Video System Selection - Sanyo PLC-XU300 Owner's Manual

Video System Selection

1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
8

Use the Point buttons to select Video or S-video
ed
or Computer 1(Component) and then press the
SELECT button.
3
Use the Point buttons to select System and then
ed
press the Point or SELECT button. Use the Point
8
buttons to select the desired system and then
ed
press the SELECT button.
Video or S-video
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4 .43, PAL-M, and PAL-N.
Component
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 70p, 1035i, and 1080i.
✔Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).
buttons to select Input and
ed
or the SELECT button.
AV System Menu (Video or S-video)
AV System Menu (Component)
Video Input
39