Sanyo PLC-XU300 Owner's Manual page 52

Setting
On start
When this function is set to On, the projector will be
automatically turned on just by connecting the AC power
cord to a wall outlet.
✔ Note:
Be sure to turn off the projector properly (see "Turning
Off the Projector" on page 20). If the projector is turned
off in the incorrect sequence, the On start function does
not work properly.
Standby mode
This function is available when operating the projector via
network.
Normal ...... Supply the power to the network function even
after turning off the projector. You can turn on/
off the projector via network, modify network
environment, and receive an e-mail about
projector status while the projector is powered
off.
Eco . ........... Select Eco when you do not use the projector
via network. The projector's network function
will stop when turning off the projector.
Refer to the owner's manual of "Network Set-up and
Operation".
✔Note:
• Factory default is Eco.
• When selecting Normal, the cooling fans may be running
depending on the temperature inside the projector even if
the projector is turned off.
Closed Caption
Closed Caption is a printed version of the program sound or
other information displayed on the screen. If the input signal
contains closed captions, you can turn on the feature and
switch the channels. Press the Point
Off, CC1, CC, CC3 or CC4.
If the closed caption is not clear, you can change the text
from Color to white.
✔ Note:
The Closed Caption is available only under the situation
below.
• When the input signal is NTSC of composite and
S-video, and the system is set according to the signal
or set on Auto.
• The system must be set on NTSC or Auto in Video
System Selection. (P.39)
• The icon of Closed Caption is displayed in gray while it
is not available.
• The Closed caption is unavailable when On-Screen
menu and P-Timer are displayed.
5
buttons to select
ed
Closed Caption
Press the Point
select Off, CC1, CC, CC3 or CC4,
and then Press Select button.
ed buttons to