Adjusting Image In D-Sub Mode; Adjusting The Picture Automatically; Adjusting Clock And Phase - Sanyo AVL-209 Instruction Manual

Adjusting Image in D-Sub (computer) mode
With working in D-Sub mode, this unit allows you to perform several adjustments for image

Adjusting the Picture Automatically

1
Press MENU to display the menu main page.
2
Press CH+ /- repeatedly to select Image page.
3
Press ENTER or VOL+/- to access the Image page.
The Auto Adjustment
4
Press ENTER or VOL+/- again to access the Auto Adjustment page.
The Auto Adjustment / Yes
5
Press ENTER or VOL+/- again to start Auto Adjustment.
The unit automatically adjusts phase, clock or position, etc.

Adjusting Clock and Phase

1
Repeat steps 1~3 in [
2
Press CH+ /- repeatedly to select
3
Press VOL+/- to adjust the value of the item until the screen is well-aligned.
Adjust the clock frequency of the set's internal clock signal. If shimmering or rainbow-like noise is
apparent in the image, try adjusting the clock frequency setting.
You may find that images blur, depending on the clock phase of your PC's Processor. If you experience
blurring , you can obtain a clearer image by adjusting the phase setting.
Note: Your computer settings should be 1280 x 768 resolution with 60Hz refresh rate.
Adjusting the Image Position
The unit allows you to adjust the image position of the screen if it is not well-aligned.
1
Repeat steps 1~3 in [
2
Press CH +/- to select
3
Press ENTER or VOL+/- to access the Image Position page.
4
Press CH+/- or VOL+/- to adjust the image position until the screen is well-
aligned.
19
item will be highlighted automatically
item will be highlighted automatically
Adjusting the Picture Automatically
Clock or Phase item.
Adjusting the Picture Automatically
Image Position item.
.
.
] to access Image page.
] to access Image page.
Image
Auto Adjustment
Image Position
Phase 30
Clock
1328
Move Select Menu to exit
Auto Adjustment
Auto Adjustment: Yes
Move Select
Menu to exit
Image
Auto Adjustment
Image Position
Phase 30
Clock 1328
Move Select
Menu to exit
Image Position
0
0
Move Select Menu to exit