Memorizing the Channels
Your LCD TV can memorize and store all the available channels for both antenna and cable channels. After the
available channels are memorized, use CH+/- to scan the channels.
Selecting the Signal Source
Before your LCD TV can memorize the available channels, you must specify the type of signal source that is
connected to the unit. (i.e., an antenna or cable system)
1
Press MENU to display the menu main page.
2
Press CH+
/-
repeatedly to select Channel page.
3
Press ENTER or VOL+/- to access the submenu.
4
Press CH+
/-
to select
5
Press ENTER or VOL+/- to toggle between Antenna or Cable.
If you are connected to an antenna, please select Antenna. If you
connect cable, please select Cable.
Storing Channels in Memory Automatically
1
Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page.
The Auto Searching item will be highlighted automatically.
2
Press ENTER or VOL+/- to store channels in memory automatically.
The unit will begin memorizing all the available channels. During the process
of the Auto Search, you can press Menu to exit.
Setting Auto Frequency Control (AFC)
1
Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page.
2
Press CH+
/-
repeatedly to select AFC item.
3
Press ENTER or VOL+/- to select On or Off.
When the AFC is set to On, the unit will automatically tune the program
frequency to provide the best possible picture and sound.
15
Source item
.
Channel
Auto Searching
Source
Cable
Channel Skip
On
Off
Fine Tune
AFC
On
Off
Frequency
55.25 MHz
Move
Select
Menu to exit
Channel
Auto Searching
Source
Cable
Channel Skip
On
Off
Fine Tune
AFC
On
Off
Frequency
55.25 MHz
Move
Select
Menu to exit
Channel
Auto Searching
Source
Cable
Channel Skip
On
Off
Fine Tune
AFC
On
Off
Frequency
55.25 MHz
Move
Select
Menu to exit
Auto Searching
CH No 11
Menu to exit
Channel
Auto Searching
Source
Cable
Channel Skip
On
Off
Fine Tune
AFC
On
Off
Frequency
55.25 MHz
Move
Select
Menu to exit