Basic Operations; Changing Channels; Adjusting The Volume; Selecting A Menu Language - Sanyo AVL-209 Instruction Manual

Basic Operations

Changing Channels

Using the Channel Buttons (CH+ or CH-)
Press the CH+ or CH- to change channels.
When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the unit
has memorized.
You will not see channels that were erased.
Direct Accessing Channels
Press the number buttons to go directly to a channel.
To select a one-digit channel: press the 0-9 number buttons to input the channel number and press ENTER or
wait for some seconds to go to the selected channel.
To select a two-digit channel: press the 0-9 number buttons to input the channel number and press ENTER or
wait for some seconds to go to the selected channel.
To select a three-digit channel: press the 0-9 number buttons to input the channel number one by one, then the
unit goes to the selected channel.
Note:
When you use the number buttons, you can directly select channels that were erased.
Using the Return
Press this button to switch between the current channel and the previous channel.

Adjusting the Volume

Using the volume buttons (VOL+ and VOL-)
Press the VOL + or VOL- to increase or decrease the volume.
Using the MUTE button
At any time, you can temporarily cut off the sound using the MUTE button.
1
Press the MUTE button and the sound cuts off.
2
To resume sound, press the MUTE button again.

Selecting a MENU Language

1
Press MENU to display the menu main
2
Press CH+ /- repeatedly to select Display page.
3
Press ENTER or VOL+/- to access the submenu.
4
Press ENTER or VOL+/- to toggle between English, French and Spanish.
5
Press Menu to exit.
17
button
Display
Language
English
Transparency
Back Light
Bright
Factory Reset Yes
DCDi On Off
Captions Off
Off
CC When Mute
Move Select Menu to exit