Displays That Appear While Connected - Sanyo DSR-3009 Manual

Network Control
I I I I Displays That Appear While Connected
Messages appear on the screen for a short period to indicate control switching and network connection status.
Main unit display
1. When control is switched to a computer
When the web browser is started and the specified procedure
is followed, operation switches to the computer and
"NETWORK CONTROL" appears on the main unit on-screen
display. (This appears even if on-screen display has been set
to "OFF".)
If the network control has been set to " ON
(DISPLAY: OFF)" using the digital video recorder
menu, the " NETWORK CONTROL" message will not
be displayed. (The digital video recorder will always
display live images regardless of network
operations.)
2. When control is switched to the main unit
When you click the S button at the computer, the
connection is canceled and control is switched to the main
unit, and the main unit on-screen display changes from
"NETWORK CONTROL" to "DISCONNECTED".
Once the switching is complete, any main unit button
operation will cause the "DISCONNECTED" display to
disappear.
English
3. When the connection is forcibly canceled from the
main unit
Pressing the [EXIT/OSD] button on the main unit for two
seconds or more will forcibly cancel the connection and cause
the "NETWORK CONTROL" display to disappear.
No connections will be received by the computer for 10
seconds after the connection has been forcibly canceled.
Computer display
1. When disconnected from the network
2. If the DVR is accessed while the connection is
disabled
3. When you try to access a DVR that already has four
computers connected
* The above screen display examples are those for the DSR-3009
model.
5