Network Set; Ip Address; Subnet Mask; Gate Way - Sanyo DSR-3009 Manual

14. NETWORK SET

When the digital video recorder is connected to a network, NETWORK SET is used to make settings
beforehand from the main unit, but the settings that have been specified from the main unit can also be
changed from the computer.
However, when network settings are changed, the digital video recorder will be momentarily
disconnected from the network and control wills witch to the digital video recorder, so the network
settings will need to be changed as necessary at the computer also. (See p. 3)

IP ADDRESS (1)

This enables the IP address for the digital video
recorder to be reset.

SUBNET MASK (2)

This enables the subnet mask for the digital video
recorder to be reset.

GATE WAY (3)

This enables the gateway for the digital video recorder
to be reset.

PORT (4)

This enables the port number for the digital video
recorder to be reset.
The setting range is from 1 to 65535 (Default setting: 80).
If the port is set to a value other than the default
value of "80", add a ":" followed by the port number
to the end of the IP address when typing in the URL.
Example of URL if the port is set to "81"
http://192.168.0.1:81/

PASSWORD SETTING (5)

This enables the passwords for each user level to be
reset. (See p. 4)
User level
User name
Available Monitoring live images
menus
Monitoring and
searching for recorded
images
Starting and stopping
recording, timer
recording, changing
main unit settings, etc.
Password (Default value)
The password can consist of 4 to 8 alphanumeric characters.

NETWORK SPEED (6)

This enables the network speed to be reset.
NO LIMIT/64/128/256/512/1024 (kbps)
When reset from the main unit, the default setting (NO LIMIT) is
restored.
Click [SAVE] to complete the NETWORK menu settings (or changes) that are displayed on the screen.
2
4
1 2 3
ID1 ID2 ID3
m m m
m m
m
1111 2222 3333
20
Menu Setting Procedures
1
3
5
6
English