Table of Contents
Advertisement
Menu Setting Procedures
12. RS-232C/RS-485 SET
This displays information related to the digital video recorder's interface.
This menu only lets you check the settings; it
cannot be used to change the settings.
CONTROL
This shows the type of interface being used to control
the digital video recorder.
• RS-232C: Control by RS-232C
• RS-485: Control by RS-485
DATA SPEED
This shows the RS-232C or RS-485 communication
speed.
• 2400/4800/9600/19200(bps)
STATUS INFO
For RS-485 communication, this specifies whether
status information is to be transmitted or not.
• ON:
Status information is to be transmitted.
• OFF:
Status information is not to be transmitted.
13. BUZZER SET
This enables the warning buzzer to sound as necessary. Select "ON" or "OFF" for the menu item settings.
These settings only cause a buzzer to sound at the digital video recorder. They do not cause a buzzer to sound at the
computer.
ALARM
(Default setting: OFF)
This causes the buzzer to sound when there is an
alarm.
DISK FULL
This causes the buzzer to sound a warning when the
free space remaining in the hard disk recording reach a
preset value. (See p. 11)
DISK ERROR
This causes the buzzer to sound a warning if a hard
disk error has occurred.
LOCK WARNING
This causes the buzzer to sound a warning if an
unauthorized operating button is pressed when the
security lock is on.
The buzzer sounds twice during a 0.5-second cycle.
Click [SAVE] to complete the BUZZER menu settings (or changes) that are displayed on the screen.
English
(Default setting: ON)
(Default setting: ON)
(Default setting: ON)
ALARM INFO
For RS-485 communication, this specifies whether
alarm information is to be transmitted or not.
• ON:
Alarm information is to be transmitted.
• OFF:
Alarm information is not to be transmitted.
ADDRESS
This shows the address when RS-485 has been
selected.
• Valid settings range from 0 to 127.
KEY IN
(Default setting: OFF)
This causes the buzzer to sound a key operation beep
when an operating button is pressed.
NON REC
(Default setting: OFF)
This causes the buzzer to sound a warning when
recording stops.
19
Advertisement
Table of Contents
