Montigo D3615 Installation & Maintenance Manual page 23

Burner tray Removal
Power and gas to the unit MUST be disconnected before installing
For instructions on how to remove the door please see the door
install/removal section.
1. Unscrew and remove the pilot cover from the burner tray.
Figure 12. Removal of the pilot cover
2. The trays can now be removed from the firebox.
Figure 12.c Removing the media trays
3. Loosen the 4 screws securing the burner strip to the stands.
Figure 12.d Removing the Burner screws
XG0222
4. Carefully slide out burner strip from the firebox.
Figure 12.e Removing the Burner
5. Unscrew brackets securing metal plate to the bottom of the
firebox.
Figure 12.f Unscrewing brackets securing metal plate
6. Remove metal plate from bottom of the firebox.
Figure 12.g Removing metal plate
Installation
23