Specifications - Trane PRGD series Installation, Operation And Maintenance Manual

Specifications

An EarthWise™ purge system has the specifications
shown in the following table:
Electrical power requirements
Purge compressor motor rated-load ampacity
Total unit ampacity
Minimum circuit ampacity
Carbon tank heater wattage
Alarm relay output rating
Operating temperature range
Storage temperature range
Storage and operating humidity range
Mounting
Dimensions (approximate)
Weight
Condensing unit refrigerant charge
PRGD-SVX01F-EN
115 Vac, 60 Hz, 1-phase, 10.3 A
110 Vac, 50 Hz, 1-phase, 10.3 A
Voltage range is +10%, -15%
8 RLA
10.3 A
12.3 A
175 W
120 Vac, 1/3 hp, 7.2 FLA
34°F to 110°F (1.1°C to 43.3°C)
-40°F to 150°F (-40.0°C to 65.5°C)
5% to 95% relative humidity, non-condensing
Direct-mounted on condenser shell above the liquid level of highest condenser
25-3/4 in. (65.4 cm) high x 27-1/2 in. (69.9 cm) wide x 21-3/4 in. (55.2 cm) deep,
with filter-drier
140 lb (63.5 kg) with filter-drier
0.60 lb (0.27 kg) of R-404A
33