Managing Ready Link Settings - Sanyo M1 Owner's Manual

Managing Ready Link Settings

Assigning Speed Dialing for Ready Link Entries
To assign speed dialing for Ready Link entries:
1.
Select
2.
Select an unassigned number and press
3.
Select Go to (left softkey), and then select the list from which you
want to set a speed dial (Personal List or Personal Grps.).
4.
Select the contact and press
– or –
Select the group, and then select an option.
Assign to assign the selected group as a speed dial.
Details to display the group details.You can select the group
member from the group list.
To use speed dial for a Ready Link entry:
From standby mode, press the appropriate key, and press
Restarting the Ready Link Service
To restart the Ready Link service:
Select
> Contacts > SpeedDial #s.
> Settings > Ready Link > Restart.
.
.
Section 2J: Using Ready Link
.
179