Setting Up Screen Call
This feature enables you to screen incoming calls by using a recorded
announcement, either one that is prerecorded or one that you have
recorded.You can also record the caller's message into the Voice Data list.
Activating Screen Call
To start Screen Call when you have incoming calls:
When the phone rings or vibrates, select Options (right softkey) >
Screen Call.
To set Auto Screen Call:
1.
Select
2.
Select On and press
3.
Set the answering time by using numeric keys or by pressing the
navigation key up or down.
4.
Select OK (left softkey). (The
display.)
While the caller's message is being recorded, press TALK to answer the
Tip:
call, or press END to stop recording and disconnect the call.
Selecting an Announcement for Screen Call
To select a Screen Call announcement:
1.
Select
Announcement.
2.
Select Pre-Recorded or Custom and press
134
Section 2H: Using Your Phone's Voice Services
> Tools > Voice Services > Screen Call > Auto.
.
> Tools > Voice Services > Screen Call >
icon is displayed on the standby
.