Managing Sprint Pcs Ready Link Settings - Sanyo SPRINT PCS VISIO SCP-7000 User Manual

Managing Sprint PCS Ready Link Settings

Assigning Speed Dialing for Sprint PCS
Ready Link Entries
To assign speed dialing for Sprint PCS Ready Link entries:
1.
Select
2.
Select an unassigned number and press
When you highlight an assigned number and press
the assigned number. Select Yes or No, or select Reset
to cancel the stored speed dial.
3.
Press Go to (left softkey), and then select the list from
which you want to set a speed dial (Phone Book,
Company List, Company Groups, Personal List, or
Personal Groups).
4.
Select the contact and press
– or –
Select the group and press
press
Set as to assign the selected group as a speed dial.
Details to display the group details. You can select
the group member from the group list.
To use Speed Dial for a Sprint PCS Ready Link entry:
From standby mode, press the appropriate key
(locations 2–9) and press
> Contacts > Speed Dial #s.
, you'll be asked whether you want to overwrite
.
Section 2I: Using Sprint PCS Ready Link
.
.
, select an option, and
.
157