Adding A New Contacts Entry - Sanyo M1 Owner's Manual

Adding a New Contacts Entry

Your phone can store up to 500 Contacts entries. Contacts entries can store
up to a total of 700 phone numbers, and each entry's name can contain 32
characters.
To add a new entry:
1.
Select
2.
Enter a name for the entry and press the navigation key down. (See
"Entering Text" on page 38.)
Enter the phone number in standby mode and press MENU . Proceed
Shortcut:
with steps 2-6 in "Saving a Phone Number" on page 33.
3.
Enter the phone number for the entry and press
4.
Select a label for the entry (Mobile, Home, Work, Pager, Fax, or
Other) and press
5.
Select Save (left softkey).
After you have saved the number, the new Contacts entry is displayed. (See
"Contacts Entry Options" on page 95.)
ICE – In Case of Emergency
Tip:
To make it easier for emergency personnel to identify important contacts,
you can list your local emergency contacts under "ICE" in your phone's
Contacts list. For example, if your mother is your primary emergency
contact, list her as "ICE–Mom" in your Contacts list.To list more than one
emergency contact, use "ICE1–___," "ICE2–___," etc.
> Contacts > Find/Add Entry > Add Contact.
.
.
Section 2F: Using Contacts 91