Alert Notification; Silence All - Sanyo Katana II User Manual

Alert Notification

Your phone can alert you with an audible tone when you change service
areas, once a minute during a voice call, when there are incoming messages
or voicemail, or when your network signal is fading.
To set alerts:
1.
Press > Settings > Sounds > Alerts.
2.
Select Service, Voicemail, Messaging, Minute Beep, or
Signal Fade and press
3.
Use your navigation key to select a setting and press

Silence All

There may be times when you need to silence your phone entirely. The
phone's Silence All option allows you to mute all sounds without turning your
phone off.
To activate Silence All:
With the phone open, press the side volume key down repeatedly in
standby mode. (The screen will display "Silence All.")
You can also select Vibrate All to set your phone to vibrate only (all
Tip:
sounds will be muted).
To deactivate Silence All:
With the phone open, press the side volume key up repeatedly to
select a volume level.
.
Section 2B: Controlling Your Phone's Settings
.
47