Serial Ports - Sundance Spas SMT332 User Manual

Version 1.3
To design a custom carrier you will require the TIM specification and the
following details of the header for the underside of the PCB. This connector is
the same as the standard TIM carrier connectors, namely Hirose FX4 series:
Underside Header:
Mating Socket on Carrier: FX4C-80S-1.27DSA
TIM site Socket on Carrier: FX4C1-80S-1.27DSA

Serial Ports

The 'C6x contains two multi-channel buffered serial ports (McBSP). The signals
involved are connected to a 0.1" pitch DIL pin header (JP2). For a full description of
signal activity and the serial protocols available, please refer to the relevant TI
documentation.
JP2 pin out is given here;
Signal
FSX1
FSR1
DX1
DR1
CLKX1
CLKR1
CLKS1
GND
Page 35 of 36
FX4A1-80P-1.27SV
Pin Pin
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
SMT332/372 User Manual
Signal
FSX0
FSR0
DX0
DR0
CLKX0
CLKR0
CLKS0
GND