Table of Contents
Advertisement
3
STEP 1
STEP 2
STEP 3
STEP 4
38
Field
RADIUS Port
Shared Secret
Secondary RADIUS Server
RADIUS Server
Address
RADIUS Port
Shared Secret
Key Renewal
Timeout
RADIUS
TX Key
Wireless MAC Filter
You can control access to your wireless network by specifying the MAC
addresses of the wireless devices that are permitted access or are blocked.
Click Interface Setup on the tab and then click WiFi Setting in the navigation pane.
Click Wireless MAC Filter. The Wireless MAC Filter page appears.
From the Select a SSID menu, choose the MAC filter settings to apply to the SSID.
To filter wireless users by MAC Address, either permitting or blocking access,
select Enabled. If you do not wish to filter users by MAC Address, use the default
setting, Disabled.
In the Access Restriction area, select either Prevent or Permit.
Setting up the Interfaces of the Gateway
Description
The port number of the RADIUS server. The default
value is 1812.
The key shared between the gateway and the server.
The IP Address of the RADIUS server.
The port number of the RADIUS server.
The key shared between the gateway and the server.
Enter a Key Renewal period, which instructs the
gateway how often it should change the encryption
keys. The default Key Renewal period is 3600 seconds.
This option features WEP used in coordination with a
RADIUS server. If you have two RADIUS servers, you
can select one to be the primary server, and the
secondary server can be a backup server. (This option
should only be used when a RADIUS server is
connected to the gateway.)
Select which TX (Transmit) Key to use. The default is 1.
Setting up the Wireless LAN
SRP 521 VoIP Gateway Administration Guide
Advertisement
Table of Contents
