Observing Ambient Temperature And Ventilation; Switching The Appliance On; Setting The Temperature - Siemens KT16R Series Instructions For Use Manual

Table of Contents

Advertisement

en
Observing ambient
temperature and
ventilation
The climate class can be found on the
rating plate. It states the room
temperature within which the appliance
can be operated. The rating plate is
located in the refrigerator compartment at
the bottom left hand side.
Climate class
SN
N
ST
T
Note
At room temperatures below +20 °C and
when super freezing is on, the interior light
may come on at a reduced luminosity
when the door is almost closed (or when
the light switch is depressed).
This is quite normal and can be ignored.
Ventilation
Fig. 6
The air on the rear panel of the appliance
heats up. Conduction of the heated air
must not be obstructed. Otherwise, the
refrigeration unit must work harder. This
increases power consumption.
Therefore: Never cover or block ventilation
openings!
8
Permitted ambient
temperature
+10 °C to 32°C
+16 °C to 32°C
+16 °C to 38°C
+16 °C to 43°C
Switching the
appliance on
Switch on the appliance with the main
switch. Fig. 5/1
The temperature display flashes,
Fig. 5/3, until the appliance has reached
the set temperature.
Interior light in refrigerator compartment is
switched on when the door is open.
Setting the
temperature
Fig. 5
Refrigerator compartment
(can be selected from +2 °C to +8 °C)
Keep pressing temperature selection
button 4 until the required refrigerator
compartment temperature is set. The
value last selected is stored.
The set temperature is indicated on
display 3.
We recommend a setting of +4 °C.
Perishable food should not be stored
above +4 °C.

Advertisement

Table of Contents
loading

Table of Contents