Collision Mitigation Braking System ™ (Cmbs ™ ) - Acura RDX Owner's Manual

DRIVING
Press the RDM button to turn the
system on or off. A green indicator
appears on the button when the
system is on.
Changing Settings
n
Use the True Touchpad to make selections.
1. From the Home screen, press the Select Settings App.
2. Select Vehicle. The vehicle must be in Park (P).
3. Select Driver Assist System.
4. Select Road Departure Mitigation Setting.
Important Safety Reminder
n
The RDM system has limitations. Over-reliance on it may result in a
collision. It is always your responsibility to keep your vehicle within the
driving lane.
Collision Mitigation Braking System
Can assist you when there is a possibility of your vehicle colliding with a
vehicle or a pedestrian detected in front of yours. The CMBS
alert you when a potential collision is determined, as well as to reduce your
vehicle speed to help minimize collision severity when a collision is deemed
unavoidable.
The system provides visual and audible alerts of a possible collision, and stops
if the collision is avoided.
The system can alert you when a potential collision is determined, and reduce
your vehicle speed to help minimize collision severity when a collision is
deemed unavoidable.
90 |
™ ™
(CMBS )
™
is designed to
The system activates when:
• The speed difference between your vehicle and a vehicle or pedestrian
detected in front of you is about 3 mph (5 km/h) and over with a chance of
a collision.
• Your vehicle speed is about 62 mph (100 km/h) or less and there is a chance
of a collision with an oncoming detected vehicle or a pedestrian in front of
you.
Alert Stages
n
The system has three alert stages for a possible collision. Depending on the
™
circumstances or CMBS settings, CMBS
stages before initiating the last stage.
Stage 1: Visual and audible warning.
Stage 2: Visual and audible warning, light brake application.
Stage 3: Visual and audible warning, strong brake application.
Changing Settings
n
Determine the warning timing. Use the True Touchpad to make selections.
1. Press SETTINGS.
2. Select Vehicle Settings, Select Driver Assist System Setup. The vehicle
must be in Park (P).
3. Select Forward Collision Warning Distance.
4. Select Long, Normal (default), or Short.
5. Press BACK to exit the menu.
n Turning the System On or Off
Press and hold the button until the
beeper sounds to switch the system on
or off. A message on the Multi-
Information Display reminds you that
the system is off.
n Important Safety Reminder
CMBS is designed to reduce the severity of an unavoidable collision. It does
not prevent collisions nor stop the vehicle automatically. It is still your
DRIVING
™
may not go through all of the
| 91