Condition Indicators - Acura RDX Owner's Manual

INSTRUMENT PANEL
Keyless Access System
There is a problem with the system.
Lane Keeping Assist System (LKAS)
There is a problem with the system.
Malfunction Indication Lamp (check engine light)
The emissions control system may have a problem, or the fuel
cap is missing or loose. If the indicator blinks, a misfire in the
engine's cylinders is detected. Stop in a safe place and wait for
the engine to cool down.
Anti-lock Brake System (ABS)
There is a problem with the anti-lock brake system. Your vehicle
still has normal braking ability, but no anti-lock function.
Low Tire Pressure / Tire Pressure Monitoring System (TPMS)
• Blinks and remains on:
Have your vehicle checked by a dealer. If the vehicle is fitted with
a compact spare, get your regular tire repaired or replaced and
put back on your vehicle as soon as you can.
Vehicle Stability Assist
There is a problem with the VSA
Collision Mitigation Braking System
There is a problem with the system, the temperature inside the
camera is too high or the camera or sensor is blocked.
Road Departure Mitigation (RDM)
There is a problem with the system, the temperature inside the
camera is too high, or the camera is blocked.
Blind Spot Information
There is a problem with the system, or the sensor is blocked.
Electric Power Steering (EPS)
There is a problem with the system. Stop the vehicle in a safe
place, and restart the engine.
24 |
® ®
(VSA ) System
®
or hill start assist system.
™ ™
(CMBS )
*1
*1 - If equipped
All-Wheel Drive (AWD)
There is a problem with the system. If the indicator blinks, the
differential temperature is too high. Stop in a safe place, put the
vehicle in Park (P), and let the engine idle until the indicator goes
off.
Adaptive Cruise Control (ACC) with Low Speed Follow (LSF)
There is a problem with the system.
• If the indicator stays on constantly, have your vehicle checked
by a dealer.
• Indicator may come on temporarily when the Maximum Load
Limit is exceeded.
Make sure the total load is within the Maximum Load Limit.
Auto Idle Stop
• Blinks if there is a problem with the Auto Idle Stop system.
Have your vehicle checked by a dealer.
• Comes on when the Auto Idle Stop system has been turned off
by the Auto Idle Stop system OFF button.

Condition Indicators

These indicators may require you to perform an action.
Parking Brake
Release the parking brake before driving. You will hear a beep if
U.S.
you drive with it not fully released.
Canada
Seat Belt Reminder
Make sure seat belts are fastened for you and all passengers. The
indicator blinks and beeps sound continuously if you or your
front passenger has not fastened your seat belts when you begin
driving. If the indicator remains on after seat belts are fastened,
see your dealer.
Low Fuel
Refuel as soon as possible. If the indicator blinks, there is a
problem with the fuel gauge. See your dealer.
INSTRUMENT PANEL
*1
*1 - If equipped
| 25